Technical Annual Status Report (Stage I) of CLRTAP Inventory Review for Turkey

Generated by CEIP: 22 th May 2017

This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols.


Review Process

The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.

The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).

Stage 1: An initial check of submissions for timeliness and completeness;

Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;

Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.

If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at emep.emissions@umweltbundesamt.at
within two weeks of your receiving this Status Report.


STAGE I REVIEW TESTS

This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:

1a Timeliness

1b Format of submission

1c Completeness per sector for 2015 emissions

1d Completeness per pollutant of your data in the WebDab database

Data included in tests:

Emissions reported under the Convention on LRTAP.


1a TIMELINESS

Date of submission of CLRTAP : 15.2.2017 , received within deadline 15.02.2017

Informative Inventory Report (IIR) : 17.5.2017 , received after deadline 15.03.2017


1b FORMAT OF SUBMISSION

Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR14. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).

CLRTAP inventory submitted in format: NFR14 (Version 2014-2) for the years 1990 to 2015


1c COMPLETENESS PER SECTOR (YEAR 2015)

The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2015. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated.


CLRTAP (Completeness per sector for 2015):

SectorNOxNMVOCSOxNH3PM2.5PM10TSPBCCOPbCdHgAsCrCuNiSeZnDIOXPAHHCBPCB
                       
1A3ai(i)     NE                
1A3aii(i)     NE                
1A3bvii     NE                
1A3di(ii)NENE   NE  NE             
1A3eiiNENE                    
1A4ci NE                    
1B1a NE   NE                
1B1bNENENENE NE  NE             
1B1cNENENENE NE  NE             
1B2ai NE                    
1B2aivNENENENE NE  NE             
1B2av NE                    
1B2b NE                    
1B2cNENENENE NE  NE             
1B2d   NE                  
2A5a     NE                
2A5b     NE                
2A5c     NE                
2A6     NE                
2B10b NE   NE                
2B3NE       NE             
2B6     NE                
2B7     NE                
2C6     NE                
2C7b     NE                
2C7c     NE                
2C7d     NE                
2D3a     NE                
2D3b NE                    
2D3c NE                    
2D3g     NE                
2D3h NE                    
2D3i NE                    
2G NE                    
2H2     NE                
2H3 NE   NE  NE             
2I     NE                
2L     NE                
3Da2a NE NE                  
3Da2b NE NE                  
3Da2c NE NE                  
3Da4 NE NE                  
3Db NE NE                  
3Dc NE NE                  
3Dd NE NE                  
3De NE NE                  
3Df NE NE                  
3FNENENENE NE  NE             
3I NE NE                  
5B1   NE    NE             
5C1biNENENE  NE  NE             
5C1biiNENENE  NE  NE             
5C1bivNENENE  NE  NE             
5E   NE NE                
                       
11BNENENENE NE  NE             
1A3ai(ii)NENENENE NE  NE             
1A3aii(ii)NENENENE NE  NE             
1A3di(i)NENENENE NE  NE             
                       
58 of 136 NFR14 Sectors listed                      
Count of overall notation keys107851061090101001080000000000000
Count of 'NE' notation keys1536122203500160000000000000
No reporting for pollutantXXXXXXXXXXXXXXXX


1d COMPLETENESS PER POLLUTANT (entire time series)

The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):

All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2015.


CLRTAP (Completeness of NFR Sectors from 2000 to 2015 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx20.60.51.07.358.89.90.00.099.0
NMVOC35.31.91.020.226.912.60.00.099.0
SOx18.72.91.05.359.010.70.00.098.9
NH315.92.22.013.261.83.00.00.099.0
PM2.50.00.00.00.00.50.00.00.00.5
PM1022.41.11.024.139.99.90.00.098.9
TSP0.20.00.00.00.50.00.00.00.8
BC0.00.00.00.00.00.00.00.00.0
CO19.60.81.08.456.211.70.00.099.0
Pb0.00.00.00.02.20.00.00.02.2
Cd0.00.00.00.02.20.00.00.02.2
Hg0.00.00.00.02.20.00.00.02.2
As0.00.00.00.02.30.00.00.02.3
Cr0.00.00.00.02.40.00.00.02.4
Cu0.00.00.00.02.30.00.00.02.3
Ni0.00.00.00.02.40.00.00.02.4
Se0.00.00.00.02.40.00.00.02.4
Zn0.00.00.00.02.40.00.00.02.4
DIOX0.00.00.00.02.20.00.00.02.2
PAH0.00.00.00.02.40.00.00.02.4
HCB0.00.00.00.03.30.00.00.03.3
PCB0.00.00.00.03.30.00.00.03.3

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of NFR Sectors from 1990 to 1999 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx20.01.01.07.059.010.00.00.099.0
NMVOC33.72.11.020.627.013.00.00.099.0
SOx19.02.01.05.059.011.00.00.099.0
NH317.01.02.013.062.03.00.00.099.0
CO16.01.01.011.156.012.00.00.098.9
Pb0.00.00.00.00.00.00.00.00.0
Cd0.00.00.00.00.00.00.00.00.0
Hg0.00.00.00.00.00.00.00.00.0
As0.00.00.00.00.00.00.00.00.0
Cr0.00.00.00.00.00.00.00.00.0
Cu0.00.00.00.00.00.00.00.00.0
Ni0.00.00.00.00.00.00.00.00.0
Se0.00.00.00.00.00.00.00.00.0
Zn0.00.00.00.00.00.00.00.00.0
DIOX0.00.00.00.00.00.00.00.00.0
PAH0.00.00.00.00.00.00.00.00.0
HCB0.00.00.00.00.00.00.00.00.0
PCB0.00.00.00.00.00.00.00.00.0

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of National Totals from 1990 to 2015 including NFR and SNAP):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx100.00.00.00.00.00.00.00.0100.0
NMVOC100.00.00.00.00.00.00.00.0100.0
SOx100.00.00.00.00.00.00.00.0100.0
NH3100.00.00.00.00.00.00.00.0100.0
PM2.50.06.20.00.00.00.00.00.06.2
PM10100.00.00.00.00.00.00.00.0100.0
TSP0.06.20.00.00.00.00.00.06.2
BC0.00.00.00.00.00.00.00.00.0
CO100.00.00.00.00.00.00.00.0100.0
Pb0.03.80.00.00.00.00.00.03.8
Cd0.03.80.00.00.00.00.00.03.8
Hg0.03.80.00.00.00.00.00.03.8
As0.03.80.00.00.00.00.00.03.8
Cr0.03.80.00.00.00.00.00.03.8
Cu0.03.80.00.00.00.00.00.03.8
Ni0.03.80.00.00.00.00.00.03.8
Se0.03.80.00.00.00.00.00.03.8
Zn0.03.80.00.00.00.00.00.03.8
DIOX0.03.80.00.00.00.00.00.03.8
PAH0.03.80.00.00.00.00.00.03.8
HCB0.03.80.00.00.00.00.00.03.8
PCB0.03.80.00.00.00.00.00.03.8

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences