Technical Annual Status Report (Stage I) of CLRTAP Inventory Review for the Republic of Moldova

Generated by CEIP: 22 th May 2017

This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols.


Review Process

The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.

The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).

Stage 1: An initial check of submissions for timeliness and completeness;

Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;

Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.

If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at emep.emissions@umweltbundesamt.at
within two weeks of your receiving this Status Report.


STAGE I REVIEW TESTS

This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:

1a Timeliness

1b Format of submission

1c Completeness per sector for 2015 emissions

1d Completeness per pollutant of your data in the WebDab database

Data included in tests:

Emissions reported under the Convention on LRTAP.


1a TIMELINESS

Date of submission of CLRTAP : 10.2.2017 , received within deadline 15.02.2017

Informative Inventory Report (IIR) : 9.3.2017 , received within deadline 15.03.2017


1b FORMAT OF SUBMISSION

Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR14. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).

CLRTAP inventory submitted in format: NFR14 (Version 2014-2) for the years 1990 to 2015


1c COMPLETENESS PER SECTOR (YEAR 2015)

The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2015. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated.


CLRTAP (Completeness per sector for 2015):

SectorNOxNMVOCSOxNH3PM2.5PM10TSPBCCOPbCdHgAsCrCuNiSeZnDIOXPAHHCBPCB
                       
1A1a   NE                  
1A3ai(i)NENENENENENENENENENENENENENENENENENENENENENE
1A3aii(i)   NENENENENE NENENENENENENENENENENE  
1A3bi  NE    NE          NE NENE
1A3bii  NE    NE          NE NENE
1A3biii  NE    NE          NE NENE
1A3biv  NE    NE          NE NENE
1A3bvNENENENENENENENENENENENENENENENENENENENENENE
1A3bviNENENENENENENENENENENENENENENENENENENENENENE
1A3bviiNENENENENENENENENENENENENENENENENENENENENENE
1A3c  NE      NE NENE     NE   
1A3dii   NE               NE  
1A3eiNENENENENENENENENENENENENENENENENENENENENENE
1A4ciiiNENENENENENENENENENENENENENENENENENENENENENE
1A5bNENENENENENENENENENENENENENENENENENENENENENE
1B1aNENENENENENENENENENENENENENENENENENENENENENE
1B1bNENENENENENENENENENENENENENENENENENENENENENE
1B1cNENENENENENENENENENENENENENENENENENENENENENE
1B2aiNENENENENENENENENENENENENENENENENENENENENENE
1B2aivNENENENENENENENENENENENENENENENENENENENENENE
1B2avNENENENENENENENENENENENENENENENENENENENENENE
1B2bNENENENENENENENENENENENENENENENENENENENENENE
1B2cNENENENENENENENENENENENENENENENENENENENENENE
1B2dNENENENENENENENENENENENENENENENENENENENENENE
2A1NENENENE    NENENENENENENENENENENENENE 
2A2NENENE     NENENENE          
2A3NENENENE    NE         NENENE 
2A5b NE                    
2B10aNE NENENENE NENENENENENENENENENENENENENENE
2B7    NENE                
2C1NE NENE    NE             
2D3a           NE          
2D3bNE NE     NE         NENENE 
2D3cNE        NENENE      NENENE 
2D3e    NE                 
2D3f    NE                 
2D3gNE NENENENENENENENENENENENENENENENENENENENE
2D3h    NE                 
2D3iNE NE     NENENENENENENENENENENENENENE
2G  NE    NE NE NENENE  NE   NENE
2H2    NENENE               
2INENENENENENE      NENE        
2K         NENE NENENENENENE  NE 
3F                    NENE
                       
                       
44 of 136 NFR14 Sectors listed                      
Count of overall notation keys837210185737371959497959697969595969510098102101
Count of 'NE' notation keys26213125252219242426242625242222232229253025


1d COMPLETENESS PER POLLUTANT (entire time series)

The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):

All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2015.


CLRTAP (Completeness of NFR Sectors from 2000 to 2015 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx19.90.019.219.013.010.00.00.081.0
NMVOC27.80.019.216.08.010.00.00.081.0
SOx6.90.019.223.124.08.00.00.081.0
NH318.70.419.218.814.810.00.00.081.0
PM2.527.00.020.219.07.09.00.00.081.0
PM1027.00.020.216.09.09.00.00.081.0
TSP28.80.120.214.010.09.00.00.081.0
BC10.80.013.218.013.08.00.019.081.0
CO11.80.021.018.122.09.00.00.081.0
Pb10.00.021.019.023.09.00.00.081.0
Cd11.00.021.017.823.09.00.00.081.0
Hg10.00.021.019.022.09.00.00.081.0
As10.00.013.219.012.89.00.019.081.0
Cr10.00.013.218.012.89.00.019.081.0
Cu11.00.013.216.013.09.00.019.081.0
Ni11.00.013.216.013.09.00.019.081.0
Se10.00.013.217.013.09.00.019.081.0
Zn11.00.013.216.013.09.00.019.081.0
DIOX7.00.021.021.024.08.00.00.081.0
PAH9.00.021.018.824.09.00.00.081.0
HCB5.90.121.021.824.08.00.00.081.0
PCB6.90.121.019.027.08.00.00.081.0

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of NFR Sectors from 1990 to 1999 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx19.20.020.019.012.910.00.00.081.0
NMVOC27.00.020.016.08.010.00.00.081.0
SOx6.10.020.223.923.78.00.00.081.0
NH318.10.920.018.013.910.10.00.081.0
CO10.10.021.018.922.09.00.00.081.0
Pb10.00.021.019.023.09.00.00.081.0
Cd11.00.021.017.023.09.00.00.081.0
Hg10.00.021.019.022.09.00.00.081.0
As10.00.014.019.012.09.00.019.081.0
Cr10.00.014.018.012.09.00.019.081.0
Cu11.00.014.016.013.09.00.019.081.0
Ni11.00.014.016.013.09.00.019.081.0
Se10.00.014.017.013.09.00.019.081.0
Zn11.00.014.016.013.09.00.019.081.0
DIOX7.00.021.021.024.08.00.00.081.0
PAH9.00.021.018.024.09.00.00.081.0
HCB6.00.021.021.024.08.00.00.081.0
PCB7.00.021.019.027.08.00.00.081.0

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of National Totals from 1990 to 2015 including NFR and SNAP):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx100.00.00.00.00.00.00.00.0100.0
NMVOC100.00.00.00.00.00.00.00.0100.0
SOx100.00.00.00.00.00.00.00.0100.0
NH3100.00.00.00.00.00.00.00.0100.0
PM2.5100.00.00.00.00.00.00.00.0100.0
PM10100.00.00.00.00.00.00.00.0100.0
TSP100.00.00.00.00.00.00.00.0100.0
BC100.00.00.00.00.00.00.00.0100.0
CO100.00.00.00.00.00.00.00.0100.0
Pb100.00.00.00.00.00.00.00.0100.0
Cd100.00.00.00.00.00.00.00.0100.0
Hg100.00.00.00.00.00.00.00.0100.0
As100.00.00.00.00.00.00.00.0100.0
Cr100.00.00.00.00.00.00.00.0100.0
Cu100.00.00.00.00.00.00.00.0100.0
Ni100.00.00.00.00.00.00.00.0100.0
Se100.00.00.00.00.00.00.00.0100.0
Zn100.00.00.00.00.00.00.00.0100.0
DIOX100.00.00.00.00.00.00.00.0100.0
PAH100.00.00.00.00.00.00.00.0100.0
HCB100.00.00.00.00.00.00.00.0100.0
PCB100.00.00.00.00.00.00.00.0100.0

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences