Technical Annual Status Report (Stage I) of CLRTAP Inventory Review for Kyrgyzstan

Generated by CEIP: 22 th May 2017

This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols.


Review Process

The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.

The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).

Stage 1: An initial check of submissions for timeliness and completeness;

Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;

Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.

If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at emep.emissions@umweltbundesamt.at
within two weeks of your receiving this Status Report.


STAGE I REVIEW TESTS

This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:

1a Timeliness

1b Format of submission

1c Completeness per sector for 2015 emissions

1d Completeness per pollutant of your data in the WebDab database

Data included in tests:

Emissions reported under the Convention on LRTAP.


1a TIMELINESS

Date of submission of CLRTAP : 14.2.2017 , received within deadline 15.02.2017

Informative Inventory Report (IIR) : Not received!


1b FORMAT OF SUBMISSION

Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR14. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).

CLRTAP inventory submitted in format: NFR14 (Version 2014-2) for the year 2015


1c COMPLETENESS PER SECTOR (YEAR 2015)

The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2015. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated.


CLRTAP (Completeness per sector for 2015):

SectorNOxNMVOCSOxNH3PM2.5PM10TSPBCCOPbCdHgAsCrCuNiSeZnDIOXPAHHCBPCB
                       
1A1a           NE          
1A1b           NE          
1A1c           NE          
1A2a           NE          
1A2b           NE          
1A2gvii                  NE   
1A2gviii           NE      NE   
1A3biNENENENENENENENENENENENENENENENENENENENENENE
1A3bvi    NENENENE NENENENENENENENENENENENENE
1A3bvii    NENENENE NENENENENENENENENENENENENE
1A3c         NE            
1A4biNENENENENENENENENENENENE          
1A5aNENENENENENENENENENENENENENENENENENENENENENE
1B1bNENENENENENENENENE             
1B2aivNENENENENENENENENENENENENENENENENENENENENENE
1B2cNENE      NE         NE   
2A1           NE          
2A2NE NE  NE  NE  NE          
2A5a      NE               
2A5b    NENENE               
2A5c    NENENE               
2D3a    NE                 
2D3gNENENENENENENENENENENENENENENENENENENENENENE
2D3h NE  NENENENE              
5ANENENENENENENENENENENENENENENENENENENENENENE
5B1NENENENENENENENENENENENENENENENENENENENENENE
5B2NENENENENENENENENENENENENENENENENENENENENENE
5C1biiiNENENENENENENENENENENENENENENENENENENENENENE
5D2 NE                    
                       
11BNENENENENENENENENENENENENENENENENENENENENENE
1A5cNENENENENENENENENENENENENENENENENENENENENENE
                       
31 of 136 NFR14 Sectors listed                      
Count of overall notation keys117115125125116116129136125136136135136136136136136136136136136136
Count of 'NE' notation keys14151312181818151414132112121212121215121212


1d COMPLETENESS PER POLLUTANT (entire time series)

The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):

All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2015.


CLRTAP (Completeness of NFR Sectors from 2000 to 2015 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx4.20.09.75.39.03.10.00.031.2
NMVOC4.70.09.96.86.83.10.00.031.2
SOx2.90.09.23.912.52.90.00.031.2
NH31.50.09.75.114.20.60.00.031.2
PM2.51.90.09.87.86.45.40.00.031.2
PM104.20.09.87.98.70.80.00.031.2
TSP0.30.09.87.89.13.90.00.031.2
BC0.00.02.20.72.21.00.00.06.2
CO3.40.09.03.512.62.80.00.031.2
Pb0.20.08.52.118.12.30.00.031.2
Cd0.00.08.51.618.92.30.00.031.2
Hg0.30.08.83.518.50.20.00.031.2
As0.00.08.81.320.90.20.00.031.2
Cr0.00.08.81.320.90.20.00.031.2
Cu0.00.08.81.318.92.40.00.031.2
Ni0.00.08.81.318.92.40.00.031.2
Se0.00.08.81.320.90.20.00.031.2
Zn0.00.08.81.318.92.40.00.031.2
DIOX0.00.08.85.916.30.20.00.031.2
PAH0.00.08.51.820.70.20.00.031.2
HCB0.00.08.01.321.40.20.00.031.2
PCB0.00.06.21.323.40.20.00.031.2

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of NFR Sectors from 1990 to 1999 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx0.00.00.00.00.00.00.00.00.0
NMVOC0.00.00.00.00.00.00.00.00.0
SOx0.00.00.00.00.00.00.00.00.0
NH30.00.00.00.00.00.00.00.00.0
CO0.00.00.00.00.00.00.00.00.0
Pb0.00.00.00.00.00.00.00.00.0
Cd0.00.00.00.00.00.00.00.00.0
Hg0.00.00.00.00.00.00.00.00.0
As0.00.00.00.00.00.00.00.00.0
Cr0.00.00.00.00.00.00.00.00.0
Cu0.00.00.00.00.00.00.00.00.0
Ni0.00.00.00.00.00.00.00.00.0
Se0.00.00.00.00.00.00.00.00.0
Zn0.00.00.00.00.00.00.00.00.0
DIOX0.00.00.00.00.00.00.00.00.0
PAH0.00.00.00.00.00.00.00.00.0
HCB0.00.00.00.00.00.00.00.00.0
PCB0.00.00.00.00.00.00.00.00.0

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of National Totals from 1990 to 2015 including NFR and SNAP):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx80.80.00.00.00.00.00.00.080.8
NMVOC80.80.00.00.00.00.00.00.080.8
SOx80.80.00.00.00.00.00.00.080.8
NH323.10.00.00.00.00.00.00.023.1
PM2.512.50.00.00.00.018.80.00.031.2
PM1031.20.00.00.00.00.00.00.031.2
TSP6.20.00.00.00.025.00.00.031.2
BC0.00.00.00.00.06.20.00.06.2
CO80.80.00.00.00.00.00.00.080.8
Pb15.40.00.07.70.00.00.00.023.1
Cd11.50.00.07.70.00.00.00.019.2
Hg19.20.00.00.00.00.00.00.019.2
As0.00.00.00.019.20.00.00.019.2
Cr15.40.00.07.70.00.00.00.023.1
Cu11.50.00.07.70.00.00.00.019.2
Ni11.50.00.07.70.00.00.00.019.2
Se0.00.00.00.019.20.00.00.019.2
Zn11.50.00.07.70.00.00.00.019.2
DIOX0.00.00.00.019.20.00.00.019.2
PAH30.80.00.00.019.20.00.00.050.0
HCB0.00.00.00.019.20.00.00.019.2
PCB0.00.00.00.019.20.00.00.019.2

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences