Technical Annual Status Report (Stage I) of CLRTAP Inventory Review for Iceland

Generated by CEIP: 22 th May 2017

This status report was prepared by the EMEP Centre on Emission Inventories and Projections (CEIP) and European Topic Centre on Air and Climate Change (ETC/ACC). The Status Report provides information based on the initial checks of the CLRTAP inventories submitted in accordance with the reporting requirements of the UNECE Convention on Long-Range Transboundary Air Pollution (CLRTAP) and its protocols.


Review Process

The technical review of national inventories involves the checking and assessment of national data submissions with a view to improving the quality of emission data and associated information.

The annual review process is carried out in three stages in accordance with the review guidelines developed by the Task Force on Emission Inventories and Projections (TFEIP) and as agreed upon by EMEP and the Executive Body of CLRTAP in 2007: Methods and procedures for the technical review of air pollutant emission inventories reported under the Convention and its protocols ( ECE/EB.AIR/GE.1/2007/16 ).

Stage 1: An initial check of submissions for timeliness and completeness;

Stage 2: A synthesis and assessment of all national submissions with respect to consistency and comparability of data with recommendations for data quality improvement;

Stage 3: In-depth reviews of selected inventories, by pollutant, country or sector, as in the workplan agreed by the Executive Body.

If you have any comments concerning the results of the tests in this report, please contact the EMEP Centre on Emission Inventories and Projections (CEIP) by email at emep.emissions@umweltbundesamt.at
within two weeks of your receiving this Status Report.


STAGE I REVIEW TESTS

This Stage 1 Status Report documents assesses the timeliness, completeness, and format of the submitted national inventories. It presents results of these initial automated tests to countries and supports the subsequent Stage II and Stage III review process. Stage I tests are:

1a Timeliness

1b Format of submission

1c Completeness per sector for 2015 emissions

1d Completeness per pollutant of your data in the WebDab database

Data included in tests:

Emissions reported under the Convention on LRTAP.


1a TIMELINESS

Date of submission of CLRTAP : 15.2.2017 , received within deadline 15.02.2017

Date of resubmission of CLRTAP : 15.3.2017 , received within deadline 15.03.2017

Informative Inventory Report (IIR) : 15.3.2017 , received within deadline 15.03.2017


1b FORMAT OF SUBMISSION

Parties are invited to check consistency of the format via RepDab (http://www.ceip.at/repdab_howtouse) before the submission of their inventory to the UNECE secretariat, the EMEP Centre on Emission Inventories and Projections (CEIP) and/or the European Commission/European Environment Agency. This section indicates whether the data submitted were in the Nomenclature for Reporting and the files were formatted as requested in the Guidelines for Estimating and Reporting Emission data. The current standard format for reporting is NFR14. Reporting templates can be downloaded from the CEIP website (http://www.ceip.at/reporting_instructions/annexes_to_guidelines).

CLRTAP inventory submitted in format: NFR14 (Version 2014-2) for the years 1990 to 2015


1c COMPLETENESS PER SECTOR (YEAR 2015)

The tables below lists all sectors where 'Not Estimated (NE)' notation keys were reported for the year 2015. At the end of the table is a statistic of how many notation keys in general were reported per pollutant and a count of not estimated sectors per pollutant. If nothing at all is reported for a certain pollutant which is listed in the tables this is also indicated.


CLRTAP (Completeness per sector for 2015):

SectorNOxNMVOCSOxNH3PM2.5PM10TSPBCCOPbCdHgAsCrCuNiSeZnDIOXPAHHCBPCB
                       
1A1a   NE                NENE
1A2a   NE                  
1A2b   NE                  
1A2e   NE                  
1A2gvii   NE                  
1A2gviii   NE               NE  
1A3ai(i)   NE               NE  
1A3aii(i)   NE               NE  
1A3bi                    NE 
1A3bii                    NE 
1A3biii                    NE 
1A3biv                    NE 
1A3bv NE                 NENE 
1A3bvi                   NENE 
1A3bvii                   NENE 
1A3dii   NE                  
1A4bi   NE               NENE 
1A4cii   NE                  
1A4ciii   NE                  
1B2avNE NENE    NE         NENENENE
2A6NENE                    
2B1   NE                  
2C1   NE                  
2C2   NE                  
2C3 NE NE                  
2D3b                   NENE 
2D3gNE NE   NE NE         NENENENE
2D3i                  NENENENE
2G                    NENE
3Da2aNENENENE                  
3Da2bNENENENE                  
3Da2cNENENENE                  
3Da3 NENE                   
3Da4NENENENE                  
3DbNENENENE                  
3DeNENENENE    NE             
3DfNENENENE                  
5A   NE                  
5B1NENENE                   
5C1bii   NE                 NE
5C1biii   NE                  
5C1biv   NE                  
5C2   NE                NE 
5D1 NE NE    NE         NENENENE
5D2 NE NE    NE         NENENENE
5D3 NE NE    NE         NENENENE
5E                    NENE
                       
11ANENE      NE         NENENENE
11BNENENE     NE         NENENENE
11CNENENE     NE         NENENENE
1A3ai(ii)                   NE  
1A3aii(ii)                   NE  
                       
52 of 136 NFR14 Sectors listed                      
Count of overall notation keys9283102114100100103110103117117122121118118119122119109114125127
Count of 'NE' notation keys14181332001090000000009192213


1d COMPLETENESS PER POLLUTANT (entire time series)

The completeness of your data in the WebDab database has been evaluated on the basis of the criteria outlined in the 2014 Guidelines for Reporting Emission Data and Projections under the CLRTAP (ECE/EB.AIR/125):

All numbers in table are as a percentage of the total number of reporting template cells per component and time series. Flagging occurs when the number of cells containing a value or a notation key is less than 80% of the total number of cells, if there are more than 10% zeroes reported, if 'Not Estimated' is reported in cells and/or if the number of values reported is less than 10%. The completeness of CLRTAP NFR Sectors is divided in two sections: 1990 to 1999 and 2000 to 2015.


CLRTAP (Completeness of NFR Sectors from 2000 to 2015 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx30.10.039.910.015.03.90.01.0100.0
NMVOC36.80.040.713.06.32.30.01.0100.0
SOx22.00.041.89.023.33.10.01.0100.0
NH316.80.040.822.114.21.00.04.0100.0
PM2.524.40.041.30.07.51.00.025.0100.0
PM1024.40.041.30.09.81.00.022.8100.0
TSP21.70.040.81.09.51.00.024.9100.0
BC15.80.040.80.018.81.00.023.2100.0
CO21.80.040.76.827.03.30.01.0100.0
Pb12.50.038.80.025.30.90.023.1100.0
Cd12.50.038.80.025.30.90.023.1100.0
Hg8.60.038.80.024.00.90.028.1100.0
As9.50.038.80.025.30.90.026.1100.0
Cr11.90.038.80.025.30.90.023.7100.0
Cu11.90.038.80.025.30.90.023.7100.0
Ni10.60.038.80.025.30.90.024.3100.0
Se9.80.038.80.025.30.90.025.8100.0
Zn11.00.038.80.025.30.90.024.0100.0
DIOX19.50.041.06.027.06.00.01.0100.0
PAH14.80.041.013.027.32.90.01.0100.0
HCB7.30.040.315.433.32.90.01.0100.0
PCB5.80.038.87.846.10.90.01.0100.0

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of NFR Sectors from 1990 to 1999 without National Totals):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx28.80.041.210.015.04.00.01.0100.0
NMVOC34.80.041.713.07.03.00.01.0100.0
SOx20.00.043.09.024.04.00.01.0100.0
NH312.20.042.025.314.01.00.04.0100.0
CO19.50.041.57.027.04.00.01.0100.0
Pb7.00.039.30.026.01.00.027.0100.0
Cd7.00.039.30.026.01.00.027.0100.0
Hg6.70.039.30.024.01.00.029.0100.0
As7.00.039.30.026.01.00.027.0100.0
Cr7.00.039.30.026.01.00.027.0100.0
Cu7.00.039.30.026.01.00.027.0100.0
Ni5.70.039.30.026.01.00.028.0100.0
Se5.70.039.30.026.01.00.028.0100.0
Zn7.00.039.30.026.01.00.027.0100.0
DIOX19.00.042.06.027.05.00.01.0100.0
PAH13.00.042.013.028.03.00.01.0100.0
HCB4.70.041.316.034.03.00.01.0100.0
PCB3.70.039.37.347.01.00.01.0100.0

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences


CLRTAP (Completeness of National Totals from 1990 to 2015 including NFR and SNAP):

Component% Value% 0% NO% NE% NA% IE% C% NR% All
NOx100.00.00.00.00.00.00.00.0100.0
NMVOC100.00.00.00.00.00.00.00.0100.0
SOx100.00.00.00.00.00.00.00.0100.0
NH3100.00.00.00.00.00.00.00.0100.0
PM2.5100.00.00.00.00.00.00.00.0100.0
PM10100.00.00.00.00.00.00.00.0100.0
TSP100.00.00.00.00.00.00.00.0100.0
BC100.00.00.00.00.00.00.00.0100.0
CO100.00.00.00.00.00.00.00.0100.0
Pb100.00.00.00.00.00.00.00.0100.0
Cd100.00.00.00.00.00.00.00.0100.0
Hg100.00.00.00.00.00.00.00.0100.0
As100.00.00.00.00.00.00.00.0100.0
Cr100.00.00.00.00.00.00.00.0100.0
Cu100.00.00.00.00.00.00.00.0100.0
Ni100.00.00.00.00.00.00.00.0100.0
Se100.00.00.00.00.00.00.00.0100.0
Zn100.00.00.00.00.00.00.00.0100.0
DIOX100.00.00.00.00.00.00.00.0100.0
PAH100.00.00.00.00.00.00.00.0100.0
HCB100.00.00.00.00.00.00.00.0100.0
PCB100.00.00.00.00.00.00.00.0100.0

"Value" the cell contains a number > 0.005;
"0" the cell contains 0 or a number < 0.005;
"NO", "NE", "NA", "IE", "C" and "NR" are notation keys as defined in Reporting Guidelines and NFR;
In certain cases the total percentage value may not be exactly the sum of the other columns because of rounding differences